﻿ LM337 Resistor and Voltage Calculator ﻿ # LM337 Resistor and Voltage Calculator  LM337 Formula The LM337 is a negative adjustable voltage regulator which can output a range of voltages from -1.5V to -38V based on the resistors R1 and R2. Normally the value of R1 is 240Ω, the recommended value by the manufacturer. However, the value of R1 may be any value from 100Ω to 1000Ω. The resistor R2 then is the chief resistor which allows for the swings in different voltage outputs. The formula is shown above.

### LM337 Voltage Calculator

0.00V

The LM337 Voltage Calculator calculates the output voltage, VOUT based on the values of resistors, R1 and R2, according to the above formula.

A user enters in R1 and R2 and the result will automatically be calculated and shown. The voltage result which is displayed above is in unit volts (V).

You can see by default that resistor R1 is 240Ω, again, as the value which the manufacturuer specifies as the recommended default value. However, you switch out the value if necessary, so this is not a fixed value. It's adjustable.

Example calculation: An example calculation using this calculator is having R1=240Ω and having R2=720Ω. This will produce an output voltage of exactly 5V, being that VOUT= -1.25V * (1+ R2/R1)= -1.25V * (1 + 720Ω/240Ω)= -5V.

### LM337 Resistor Calculator

0.00Ω

The LM337 Resistor Calculator calculates the value of resistor, R2, based on the values of resistor, R1, and the output voltage, VOUT.

A user enters in R1 and VOUT and the result will automatically be calculated and shown. The resistance result which is displayed above is in unit ohms (Ω).

Again, you can see that the value that resistor R1 is by default is 240Ω, as the value which the manufacturer specifies as the recommended default value. However, you can switch out the value if necessary, so this is not a fixed value. It's adjustable.

Example calculation: An example calculation using this calculator is having R1=240Ω and VOUT= -5V. This will produce an output voltage of exactly 5V, being that VOUT= R1 * (VOUT + 1.25V)/-1.25V)= 240Ω * ((5V+1.25V)/-1.25V)= 720Ω.

Related Resources

﻿